Is the system suitable with my cylindric tank? How do I encode the dimensions?

Yes, cylindrical tanks are very frequent and are of course compatible with our tankmonitoring systems.

On the field, there are two types of cylindrical tanks: vertical cylindrical tanks and horizontal tanks. Both types of tanks are supported.

When installing the product using the mobile application, after checking the connectivity is right, you will be asked to encode the dimensions of the measured tank. Based on this, the measured distance will be converted into volume.

This encoding only takes a few minutes.

Horizontal tanks

To encode the dimensions of your horizontal tank, all you need in the application is to outside tank and then horizontal tank. The diameter and length of the tank are requested as shown in the diagram. 

At the size of the sleeve, the maximum acceptable length is 7 centimeters. Beyond this, the measurement can be altered and it is advisable to drill into the tank to avoid problems of measurement instability.

Vertical tanks

These tanks are included in the category outside tanks. If your tank is underground and vertical cylindrical type, go to the category of tanks (this situation is rare but can happen in case of water tanks).

The height and internal diameter of the tank must be estimated. It is possible to modify these values ​​later if the data do not match. At the size of the sleeve, the maximum acceptable length is 7 centimeters. Beyond this, the measurement can be altered and it is advisable to drill into the tank to avoid problems of measurement instability.